High-Fidelity iPhone 7 Carrier Phones LCD Screen Glass Lens Cell Phone Accessories Parts

High-Fidelity iPhone 7 Carrier Phones LCD Screen Glass Lens Cell Phone Accessories Parts

Black and White colors are avaible

Features:

1. Only fit for iPhone 7(4.7inch) white and black, Model: A1660, A1778, A1779.
2. Brand-new, 100% tested before shipping and working perfectly.
3. To replace your old, broken, cracked, damaged faulty disply with LCD touch Screen.
4. Double-test before shipping, three-month return policy & warranty.
5. Every cable and screw should be connected in correct position. If you have no experience, we advise you should let the screen connnected by some one with experience!
6. Any problem during installation, please contact us firstly. You would get professional advice from us. All problems will be resolved in 24 hours!

Note:
1.Disconnect the battery cable before installation or make sure your phone is powered off.
2.There are many screws when you replacing the assembly which are different in size and length. it may broke the screen if you put the screw in wrong place.
3.If camera and speaker can't be use, please check if you put the camera and speaker in right place and try to installation the screen again.
4.If after install the screen there appear regular lines on the screen or the screen can't be touched, please Remove the LCD screen and clean the connectors. Lines are normally caused to the LCD cable is not correct clipped or some dust in the connectors.
5.Please email to me if any product issue, I will try my best to provide good service for you.

Q & A

Q: Why my phone works but the screen is not displaying?
A: When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen. If that happens, simply reconnect the cable, also disconnect and reconnect the battery connector.
Q: Why the touch function of the screen is not working correctly?
A: This is because the digitizer cable might loose connection if not plugged in firmly, you can transfer the foam that attaches to the back of original digitizer cable connector onto the new one.