Genuine iPhone 8P Working Original Apple Cracked Screen LCD Replaced Glass

Genuine iPhone 8 Plus Working Original Apple Cracked Screen LCD Replaced Glass

Feature:
1. Only for iPhone 8 Plus (5.5")
2, Grade AAA+++ no dead pixel
3. Each screen is tested before shipping and 100% working

How to Install / Tips:
1. When you open the screen assembly, in order not to break the home button flex, please use proper strength and the angles between the screen and the rear housing should be within 30°.
2. After pry up the screen assembly, keep the angles between the screen and the rear housing within 90° in order not to damage the flex cables.
3. First unplug the front facing camera flex connector, then LCD screen flex connector, last the digitizer flex connector.
4. The flex cables should be bent a little bit before the installation, but do not use too much strength.
5. Do not force any strength on IC which located on the flex cable.
6. When connect the connectors, keep the angles between the screen and the rear housingwithin 90°.
7. Plug the digitizer flex connector, LCD screen flex connector, front facing camera flex connector.

Note:

1.If the camera and speaker can't be used,please check if you put the camera and speaker in right place and try to installation the screen again
2.If the screen is in good condution after installing,but just can't power on,please make sure for iPhone IOS is upgraded to the latest version.

3.If install the screen and it appears regular lines on the screen,please separate the screen and leave the phone alone for a bit in a dry environment. Sometimes There will be static electricity.Please leave the phone alone overnight and then install again see if this problem persists in the morning.